Mochini oa GMMA-60S o ikemetseng oa tšepe o hahang
Tlhaloso e Khutšoanyane:
Mechini ea GMMA Plate Edge beveling e fana ka ts'ebetso e phahameng le ts'ebetso e nepahetseng ho bevel le ts'ebetso e kopaneng. Ka mefuta e mengata e fapaneng ea botenya ba poleiti 4-100mm, bevel angel 0-90 degree, le mechini e ikhethileng bakeng sa khetho. Melemo ea theko e tlase, lerata le tlase le boleng bo holimo.
Mochini oa GMMA-60S o ikemetseng oa tšepe o hahang
Selelekela sa Lihlahisoa
GMMA-60Spoleitimochini o silang ka bohalee nang le mefuta e mengata ea ho sebetsa ea botenya ba Clamp 6-60mm, lengeloi la bevel 10-60 degree le fetolehang holim'a tšepe ea tšepe ea tšepe bakeng sa ho lokisetsa weld.GMMAletoto la lihlooho tse le phahameng bohlokoa ka fihla Ra 3.2-6.3.
Ho na le mekhoa e 2 ea ho sebetsa:
Mohlala oa 1: Sehahi se tšoara tšepe ebe se isa mochining ho phethela mosebetsi ha se ntse se lokisa lipoleiti tse nyane tsa tšepe.
Mohlala oa 2: Mochini o tla tsamaea moeling oa tšepe le mosebetsi o felletseng ha o ntse o lokisa lipoleiti tse kholo tsa tšepe.
Litlhaloso
| Mohlala No. | GMMA-60Smochini o silang liplate |
| Phepelo ea motlakase | AC 380V 50HZ |
| Kakaretso ea Matla | 3400W |
| Lebelo la Spindle | 1050r/mots |
| Fepa Lebelo | 0-1500mm/min |
| Botenya ba Clamp | 6-60 limilimithara |
| Bophara ba Clamp | ≥80 limilimithara |
| Bolelele ba Ts'ebetso | 300 limilimithara |
| Bevel angel | 0-60 likhato tse feto-fetohang |
| Bophara ba Bevel e le 'Ngoe | 10-20 limilimithara |
| Bevel Width | 0-45 limilimithara |
| Sekhahla Plate | 63 limilimithara |
| Sekhahla QTY | 6PCS |
| Worktable Height | 700-760 limilimithara |
| Sebaka sa Maeto | 800*800mm |
| Boima ba 'mele | NW 200KGS GW 255KGS |
| Boholo ba Pakete | 800*690*1140mm |
Tlhokomeliso: Mochini o tloaelehileng o kenyelletsa hlooho ea 1pc cutter + 2 sete ea Insets + Tools haeba ho ka etsahala + Ts'ebetso ea Manual
Fetures
1. E fumaneha bakeng sa poleiti ea tšepe ea tšepe ea Carbon, tšepe e sa hloekang, aluminium joalo-joalo
2. E ka sebetsana le "K","V","X","Y" ea fapanyetsana mofuta oa motsoako oa bevel
3. Mofuta oa Milling o nang le Phahameng o Fetileng o ka fihla ho Ra 3.2-6.3 bakeng sa bokaholimo
4. Cold Cutting, ho boloka matla le lerata le tlase, ho bolokehile haholoanyane le tikoloho
5. Sebaka se pharaletseng sa ho sebetsa se nang le botenya ba Clamp 6-60mm le lengeloi la bevel 10-60 degree e fetohang
6. Ts'ebetso e Bonolo le bokhoni bo phahameng
Sebaka sa Bevel
Kopo
E sebelisoa haholo sebakeng sa lifofane, indasteri ea petrochemical, sekepe sa khatello, kaho ea likepe, metallurgy le ho laolla tšimo ea tlhahiso ea feme ea welding.
Pontšo
Sephutheloana
