ISP-80 umbhobho wePneumatic umatshini bevelling
Inkcazelo emfutshane:
Iimodeli ze-ISP id-inyuswe umbhobho we-pneumatic umatshini we-beveling, kunye nezibonelelo zobunzima bokukhanya, ukusebenza ngokulula. A draw nut iqinisiwe eyandisa i mandrel iibhloko phezulu kwithambeka kunye nxamnye umphezulu id ukunyuselwa positive, self embindini kwaye squared ukuya bore. Inokusebenza ngemibhobho yezinto ezahlukeneyo, ingelosi ethandekayo ngokweemfuno.
ISP-80Umbhobho we-pneumatic umatshini we-bevelling
Intshayelelo
Olu luhlu ngumbhobho onyuswe kwi-idumatshini wokuhlamba, kunye ne-advanteji yokusebenza lula, ubunzima obulula, idrayivu enamandla,isantya sokusebenza esikhawulezayo,intsebenzo entle, njl. njl ukubhora. Inokusebenza ngemibhobho yezinto ezahlukeneyo, ingelosi ye-beveling ngokwe-requirements.Driven nganye efumaneka nge-pneumatic kunye nombane.
Inkcazo
Unikezelo lwamandla: 0.6-0.8 MPa @ 900-1500 L/min
| Umzekelo No. | Uluhlu lokuSebenza | Ubunzima bodonga | Isantya sokujikeleza | Uxinzelelo loMoya | Ukusetyenziswa koMoya | |
| ISE-30 | φ18-30 | 1/2”-3/4” | ≤15mm | 60 r/min | 0.6 MPa | 900 L/min |
| ISE-80 | φ28-89 | 1”-3” | ≤15mm | 50 r/min | 0.6 MPa | 900 L/min |
| ISE-120 | φ40-120 | 11/4”-4” | ≤15mm | 38 r/min | 0.6 MPa | 900 L/min |
| ISE-159 | φ65-159 | 21/2”-5” | ≤20mm | 35 r/min | 0.6 MPa | 1000 L/min |
| ISE-252-1 | φ80-273 | 3”-10” | ≤20mm | 16 r/min | 0.6 MPa | 1000 L/min |
| ISE-252-2 | φ80-273 | ≤75mm | 16 r/min | 0.6 MPa | 1000 L/min | |
| ISE-352-1 | φ150-356 | 6”-14” | ≤20mm | 14 r/min | 0.7 MPa | 1200 L/min |
| ISE-352-2 | φ150-356 | ≤75mm | 14 r/min | 0.7 MPa | 1200 L/min | |
| ISE-426-1 | φ273-426 | 10”-16” | ≤20mm | 12 r/min | 0.7 MPa | 1500 L/min |
| ISE-426-2 | φ273-426 | ≤75mm | 12 r/min | 0.7 MPa | 1500 L/min | |
| ISE-630-1 | φ300-630 | 12”-24” | ≤20mm | 10 r/min | 0.7 MPa | 1500 L/min |
| ISE-630-2 | φ300-630 | ≤75mm | 10 r/min | 0.7 MPa | 1500 L/min | |
| ISE-850-1 | φ490-850 | 24”-34” | ≤20mm | 9 r/min | 0.8 MPa | 1500 L/min |
| ISE-850-2 | φ490-850 | ≤75mm | 9 r/min | 0.8 MPa | 1500 L/min | |
Qaphela: Oomatshini abaqhelekileyo kuquka i-3 pcs yesixhobo se-bevel (0 ,30,37.5 degree) + Izixhobo + i-Operation Manual
Iimpawu eziphambili
1. Ephathekayo enobunzima obulula.
2. Uyilo lomatshini odibeneyo ukuze usebenze lula kunye nokugcinwa.
3. Izixhobo ze-Bevel zokugaya kunye nokusebenza okuphezulu kwangaphambili kunye nozinzile
4. Ifumaneka kwizinto ezihlukeneyo zetsimbi ezifana ne-carbon steel, insimbi engenasici, i-Ally njl.
5. Isantya esilungelelanisiweyo, ukuzithemba
6. Inamandla aqhutywa ngenketho ye-Pneumatic, uMbane.
7. Ingelosi yeBevel kunye nokudibanisa kunokwenziwa ngokweemfuno zokusetyenzwa.
Bevel Surface
Isicelo
Isetyenziswa kakhulu kwimimandla yepetroleum, imichiza, igesi yendalo, ulwakhiwo lweplanti yamandla, ibholier kunye namandla enyukliya, umbhobho njl.
Isiza soMthengi
Ukupakishwa
