Case study of TPM-60H head sealing machine for adding V-shaped bevels to the composite layer

Customer company situation:

A certain group limited company's business scope includes the production of sealing heads, HVAC environmental protection equipment, distributed photovoltaic power generation, etc.

Case study of TPM-60H head sealing machine

A corner of the customer's workshop:

customer's workshop 1
customer's workshop 2

Customer Demand The on-site processing of workpieces mainly consists of 45+3 composite heads, with the process of removing the composite layer and also making V-shaped welding bevels.

image

Based on the customer's situation, we recommend that they choose the Taole TPM-60H head machine and TPM-60H type head/roll pipe multifunctional beveling machine. The speed is between 0-1.5m/min, and the clamping steel plate thickness is between 6-60mm. The single feed processing slope width can reach 20mm, and the bevel angle can be adjusted freely between 0 ° and 90 °. This model is a multifunctional beveling machine, and its bevel form covers almost all types of bevels that need to be processed. It has a good bevel processing effect for heads and roll pipes.

 

Product Introduction: This is a dual-purpose beveling machine for pressure vessel heads and pipelines that can be directly lifted onto the head for use. This machine is designed for butterfly head beveling machine, elliptical head beveling machine, and conical head beveling machine. The beveling angle can be adjusted freely from 0 to 90 degrees, and the maximum beveling width is: 45mm, processing line speed: 0~1500mm/min. Cold cutting processing, no need for secondary polishing.

Product parameters

Technical Parameter
Power Supply AC380V 50HZ

Total Power

6520W

Processing head thickness

6~65MM

Processing head bevel diameter

>Ф1000MM

Processing pipe bevel diameter

>Ф1000MM

Processing height

>300MM

Processing line speed

0~1500MM/MIN

Bevel angle

Adjustable from 0 to 90 degrees

Product Features

Cold cutting machining

No need for secondary polishing
Rich types of bevel processing No need for special machine tools to process bevels

Simple operation and small footprint; Simply lift it onto the head and it can be used

Surface smoothness RA3.2~6.3

Using hard alloy cutting blades to easily cope with changes in different materials

 

Write your message here and send it to us

Post time: Mar-27-2025