Ngwaọrụ 6d na-ebu ụzọ 6D
Nkọwa mkpụmkpụ:
GBM Metal steel nchara beel beel na-eji ọtụtụ nkọwapụta ngwaahịa dị iche iche. Nye ezigbo mma, arụmọrụ, nchekwa na mfe ọrụ maka nkwadebe Weld.
Nkọwapụta ngwaahịa
GBM Models Plate Beveling igwe bụ ụdị ịkekọrịta ụdị na-ekerịta ngwa ngwa site na iji ndị na-arata akwa. A na-eji ụdị ụdị ụdị a n'ọtụtụ ebe, ụlọ ọrụ Petrochemical, ụgbọ ala, ụgbọ mmiri, na-ebugharị, ọla na-eme mkpọtụ na nhazi mmepụta ọrụ. Ọ bụ arụmọrụ kachasị elu maka carbon steel beveling nke nwere ike nweta ngwa ngwa na 1.5-2.6 Mita / min.
Isi atụmatụ
1.Mporpported Reducer na moto maka arụmọrụ dị elu, ike na-echekwa ma dị mfe ibu.
A na-eji wheels na plate plamping igwe na-eme ka akpaaka na-aga ije na efere
3.3.3.3 Ibelata Bevel na-enweghị oxidition na elu nwere ike ịgbado ọkụ
4.4.bevel Millian 25-45 dị mfe na ndozi dị mfe
5.5.Machine na-abịa na ndọpụ ujo
6.6.Single Bevel nwere ike ịbụ 12 / 16mm ruo Bevel obosara 18 / 28mM 7.speed ruru 2.6 Mita / min
7.8.O olu, enweghị scrap ígwè gbawara, nchekwa.
Tebụl parameter ngwaahịa
| Ụdị | GDM-6D / 6D-t | Gbm-12d / 12d-r | GBM-16D / 16D-R |
| Ike nke ikely | AC 380V 50HZ | AC 380V 50HZ | AC 380V 50HZ |
| Ike niile | 400w | 7500 | 1500w |
| Spindle ọsọ | 1450r / min | 1450r / min | 1450r / min |
| Nri ọsọ | 1.2-2.0m / min | 1.5-2.6m / min | 1.2-2.0m / min |
| Clamp ọkpụrụkpụ | 4-16mm | 6-30mm | 9-40mm |
| Climp obosara | > 55mm | > 75mm | > 115mm |
| CLAP ogologo | > 50mm | > 70mm | > 100mm |
| Angevel Angel | 25/30 / 37.5 / 45 ogo | 25 ~ 45 ogo | 25 ~ 45 ogo |
| Ibule Obosara bevel | 0 ~ 6mm | 0 ~ 12mm | 0 ~ 16mm |
| Obosara bevel | 0 ~ 8mm | 0 ~ 18mm | 0 ~ 28mm |
| Dayameta bebter | Dia 78mm | Dia 93mm | Dia 115mm |
| Cutter Qty | 1 pc | 1 pc | 1 pc |
| Ọrụ dị elu | 460mm | 700mm | 700mm |
| Na-atụ aro elu tebụl | 400 * 400mm | 800 * 800mm | 800 * 800mm |
| Igwe n.weight | 33/39 kgs | 155KGS / 235 kgs | 212 KGS / 315 Kgs |
| Igwe gacha | 55/60 kgs | 225 kgs / 245 kgs | 265 kgs / 375 kgs |
Ihe onyonyo zuru ezu
Bevel kwaro maka ntụaka
Mbufe
