Layin jerin Semi-Auto tare da babban aiki mai ƙarfi karfe mai zagaye tebur na tebur r-kusurwa na inji
A takaice bayanin:
Tsarin zagaye na TCM yana da kayan aiki don farantin farantin karfe mai zagaye / chakfering / de-Burring. Yana aiki ko zaɓi don haɓakar guda ɗaya ko zagaye biyu.
Bayanin samfuran
Tsarin zagaye na TCM yana da kayan aiki don farantin farantin karfe mai zagaye / chakfering / de-Burring. Yana aiki ko zaɓi don haɓakar guda ɗaya ko zagaye biyu. Mafi yawa ga radius R2, R3, C2, C3.This Injin da sauransu, masana'antar haɓakawa da kuma kayan aikin kayan aiki da kuma zane da kuma shafi m.
Zaɓin zaɓuɓɓuka na zaɓi kamar kowane bayanin ƙirar ƙarfe & girman mutum da ƙarfe na aikin.
Babban fa'ida
1. Injin na tsaye ya dace da sarrafa mai aiki, nau'in wayar hannu da nau'in babban farantin tare da babban ƙarfin da yawa.
2. Ballast tank PSC misali.
3. Musamman na'urar ƙirar injin na musamman da ɗan ƙaramin aiki kawai.
4. Yankan sanyi don guje wa kowane bangare da kuma hancifide. Yin amfani da daidaitaccen tsarin milling da kayan carbide
5. Radiu ya samu ga R2, R3, C2, C3 ko mafi yiwuwa R5-R5
6. Kewayon aiki mai yawa, mai sauƙin daidaitawa don gefen chamfering
7. Gudun aiki mai aiki wanda aka kiyasta zama 2-4 m / min
Jerin abubuwan kwatanta
| Samfuri | Tcm-sr3-d d |
| Adadin Wuta | AC 380V 50Hz |
| Jimlar iko | 1900w & 0.5-0.8 MPa |
| Spindle sauri | 2800r / min |
| Gudun sauri | 0 ~ 4000mm / Min |
| CLONA YAD DA | 8 ~ 60m |
| Girma | ≥100mm |
| Matsakaicin matsakaicin | ≥300mm |
| Bevel nisa | R2 / R3 |
| Mai canzawa diami | 2 * Dialm |
| Shigar da qty | 2 * 3 inji mai kwakwalwa |
| Matsayi mai tsayi | 800-860mm |
| Girman aiki | 1200 * 900mm |
Aikin aiwatarwa
