ISP-80 Pneumatic bututu bevelling inji
Takaitaccen Bayani:
ISP Models id-saka pneumatic bututu beveling inji, tare da abũbuwan amfãni na nauyi nauyi, sauki aiki. An ɗora ƙwaya mai zana wanda ke faɗaɗa madauki ya toshe sama da wani tudu kuma a kan fuskar id don ingantacciyar hawa, mai akida kai da murabba'i zuwa gungu. Yana iya aiki tare da daban-daban abu bututu, beveling mala'ika kamar yadda ta bukatun.
ISP-80Pneumatic bututu bevelling inji
Gabatarwa
Wannan silsilar bututu ne da aka saka idinjin beveling, tare da amfani da sauki aiki, haske nauyi, iko drive, azumi aiki gudun, nice yi da dai sauransu A Draw goro ne tighened, wanda faɗaɗa da mandrel tubalan sama da wani tudu da kuma a kan ID surface ga tabbatacce hawa, kai a tsakiya da kuma squared zuwa gundura. Yana iya aiki tare da daban-daban abu bututu, beveling mala'ika kamar yadda ta bukatun.Driven samuwa ta hanyar pneumatic da lantarki.
Ƙayyadaddun bayanai
Ƙarfin wutar lantarki: 0.6-0.8 MPa @ 900-1500 L/min
| Model No. | Range Aiki | Kaurin bango | Gudun Juyawa | Hawan iska | Amfani da iska | |
| TIE-30 | φ18-30 | 1/2" - 3/4" | ≤15mm | 60r/min | 0.6 MPa | 900 l/min |
| TIE-80 | shafi 28-89 | 1"-3" | ≤15mm | 50r/min | 0.6 MPa | 900 l/min |
| TIE-120 | φ40-120 | 11/4"-4" | ≤15mm | 38r/min | 0.6 MPa | 900 l/min |
| TIE-159 | shafi 65-159 | 21/2"-5" | ≤20mm | 35r/min | 0.6 MPa | 1000 l/min |
| TIE-252-1 | φ80-273 | 3"-10" | ≤20mm | 16r/min | 0.6 MPa | 1000 l/min |
| TIE-252-2 | φ80-273 | ≤75mm | 16r/min | 0.6 MPa | 1000 l/min | |
| Farashin-352-1 | φ150-356 | 6"-14" | ≤20mm | 14r/min | 0.7 MPa | 1200 l/min |
| Farashin-352-2 | φ150-356 | ≤75mm | 14r/min | 0.7 MPa | 1200 l/min | |
| Farashin-426-1 | Saukewa: 273-426 | 10-16" | ≤20mm | 12r/min | 0.7 MPa | 1500 l/min |
| Farashin-426-2 | Saukewa: 273-426 | ≤75mm | 12r/min | 0.7 MPa | 1500 l/min | |
| Farashin-630-1 | φ300-630 | 12-24" | ≤20mm | 10r/min | 0.7 MPa | 1500 l/min |
| Farashin-630-2 | φ300-630 | ≤75mm | 10r/min | 0.7 MPa | 1500 l/min | |
| Farashin-850-1 | Farashin 490-850 | 24"-34" | ≤20mm | 9r/min | 0.8 MPa | 1500 l/min |
| Farashin-850-2 | Farashin 490-850 | ≤75mm | 9r/min | 0.8 MPa | 1500 l/min | |
Lura: Daidaitaccen injuna gami da pcs 3 na kayan aikin bevel (digiri 0,30,37.5) + Kayan aiki + Manual na Aiki
Babban fasali
1. Mai ɗauka tare da nauyi mai sauƙi.
2. Ƙaƙƙarfan ƙirar inji don sauƙin aiki da kulawa.
3. Bevel kayan aikin milling tare da babban baya da kuma barga yi
4. Akwai don bambancin kayan ƙarfe kamar carbon karfe, bakin karfe, Ally da dai sauransu.
5. Daidaitacce gudun, kai-certering
6. Ƙarfin iko tare da zaɓi na Pneumatic , Electric.
7. Bevel mala'ika da haɗin gwiwa za a iya yi kamar yadda aiki bukatun.
Bevel Surface
Aikace-aikace
An yi amfani da shi sosai a fannin man fetur, sinadarai, iskar gas, gina tashar wutar lantarki, wutar lantarki da makamashin nukiliya, bututun mai da dai sauransu.
Shafin Abokin ciniki
Marufi
