Electric pipe cold cutter and beveller
Short Description:
OCE models od-mounted electric pipe cold cutting and beveling machine with light weight, minimal radial space . It can separate to two half and easy to operate. Machine can do cutting and beveling simultaneously.
Electric pipe cold cutter and beveller
Introduction
This series are portable od-mountd frame type pipe cold cutting and beveling machine with advantages of light weight, minimal radial space, easy operation and so on. Split frame design can separate mount the od of the in-lin pipe for strong and stable clamping to process cutting and beveling sumultaneously.
Specification
Power Supply: 220-240v 1 ph 50-60 HZ
Motor Power: 1.5-2KW
| Model NO. | Working Range | Wall Thickness | Rotation Speed | |
| OCE-89 | φ 25-89 | 3/4‘’-3‘’ | ≤35mm | 42 r/min |
| OCE-159 | φ50-159 | 2‘’-5‘’ | ≤35mm | 20 r/min |
| OCE-168 | φ50-168 | 2‘’-6‘’ | ≤35mm | 18 r/min |
| OCE-230 | φ80-230 | 3‘’-8‘’ | ≤35mm | 15 r/min |
| OCE-275 | φ125-275 | 5‘’-10‘’ | ≤35mm | 14 r/min |
| OCE-305 | φ150-305 | 6‘’-10‘’ | ≤35mm | 13 r/min |
| OCE-325 | φ168-325 | 6‘’-12‘’ | ≤35mm | 13 r/min |
| OCE-377 | φ219-377 | 8‘’-14‘’ | ≤35mm | 12 r/min |
| OCE-426 | φ273-426 | 10‘’-16‘’ | ≤35mm | 12 r/min |
| OCE-457 | φ300-457 | 12‘’-18‘’ | ≤35mm | 12 r/min |
| OCE-508 | φ355-508 | 14‘’-20‘’ | ≤35mm | 12 r/min |
| OCE-560 | φ400-560 | 16‘’-22‘’ | ≤35mm | 12 r/min |
| OCE-610 | φ457-610 | 18‘’-24‘’ | ≤35mm | 11 r/min |
| OCE-630 | φ480-630 | 20‘’-24‘’ | ≤35mm | 11 r/min |
| OCE-660 | φ508-660 | 20‘’-26‘’ | ≤35mm | 11 r/min |
| OCE-715 | φ560-715 | 22‘’-28‘’ | ≤35mm | 11 r/min |
| OCE-762 | φ600-762 | 24‘’-30‘’ | ≤35mm | 11 r/min |
| OCE-830 | φ660-813 | 26‘’-32‘’ | ≤35mm | 10 r/min |
| OCE-914 | φ762-914 | 30‘’-36‘’ | ≤35mm | 10 r/min |
| OCE-1066 | φ914-1066 | 36‘’-42‘’ | ≤35mm | 10 r/min |
| OCE-1230 | φ1066-1230 | 42‘’-48‘’ | ≤35mm | 10 r/min |
Note: Standard machine packaging including : 2 pcs cutter,2pcs of bevel tool +tools + operation manual
Fetures
1. Low axial and radial clearance light weight suitable for working at narrow and complicated site
2. Split frame design can separate to 2 half, easy to process when two end not open
3. This machine can process cold cutting and beveling simultaneously
4. With option for electric, Pneuamtic, Hydraulic ,CNC based on site condition
5. Tool feed automatically with Low noise, long life and stable performance
6. Cold working without Spark , Will not affect the pipe material
7. Can process different pipe material : Carbon steel, stainless steel , alloys etc
Bevel Surface
Application
Widely used in the fields of petroleum, chemical, natural gas,power plant construction,bolier and nuclear power, pipeline etc.
Customer Site
Packaging
